Refilled Ink For Canon CL- 546 XL Colour Inkjet Cartridge
Refilled Ink For Canon CL- 546 XL Colour Inkjet Cartridge
Remanufactured cartridge!!!
You can save up to 75% on printing costs.
Very high Quality remanufactured Cartridges.
100% total satisfaction or your money back.
How your Canon cartridge is remanufactured
Visual inspection - to eliminate cartridges with obvious flaws.
Electrical test - to ensure cartridge electrics.
Pre soak - using specially formulated flushing fluid to rehydrate & soften dried ink on the print head.
Nozzle atomisation - using deionised steam to fully penetration print head & clean any blockages.
Flush clean - 50 Degrees C heated flushing/cleaning fluid injected via head to flush out old ink.
Flush extraction - flushing fluid is now evacuated via print head, to leave cartridge internally clean + ready to fill
Filling process - only the best German ink (OCP) is used. It is filled through the print head, via a vacuum application to a weighed quantity.
3 millilitres of ink, is now drawn out of the cartridge to prime it ready for printing.
Print test - each cartridge is tested to ensure quality.
Cartridge clean - cartridge is cleaners externally & labelled
Cartridge seal - finally cartridges are taped or clipped to prevent leakage and put into a sealed bag.
For The Following Printers:
Canon Pixma iP2850
Canon Pixma MG2400
Canon Pixma MG2450
Canon Pixma MG2455
Canon Pixma MG2500
Canon Pixma MG2550
Canon Pixma MG2550S
Canon Pixma MG2551S
Canon Pixma MG2555
Canon Pixma MG2555S
Canon Pixma MG2900
Canon Pixma MG2950
Canon Pixma MG2950S
Canon Pixma MG3050
Canon Pixma MG3051
Canon Pixma MG3052
Canon Pixma MG3053
Canon Pixma MX495
Canon Pixma TR4550
Canon Pixma TR4551
Canon Pixma TR4650
Canon Pixma TR4651
Canon Pixma TS205
Canon Pixma TS305
Canon Pixma TS3100
Canon Pixma TS3150
Canon Pixma TS3151
Canon Pixma TS3350
Canon Pixma TS3351
Canon Pixma TS3352
Canon Pixma TS3355
Canon Pixma TS3450
Canon Pixma TS3451
Canon Pixma TS3452
Please note :
It is not possible to reset the ink status monitor on remanufactured cartridges.
When the cartridges are installed they will register as low or empty.
When prompted please press and hold the resume button for at least 5 seconds to enable you to use the full contents.