Refilled Ink For Canon PG-510 PG 510 Black

Remanufactured cartridge!!!

 
You can save up to 75% on printing costs.
 
Very high Quality remanufactured Cartridges.
 
100% total satisfaction or your money back.

 
How your Canon cartridge is remanufactured

    Visual inspection - to eliminate cartridges with obvious flaws.
    Electrical test - to ensure cartridge electrics.
    Pre soak - using specially formulated flushing fluid to rehydrate & soften dried ink on the print head.
    Nozzle atomisation - using deionised steam to fully penetration print head & clean any blockages.
    Flush clean - 50 Degrees C heated flushing/cleaning fluid injected via head to flush out old ink.
    Flush extraction - flushing fluid is now evacuated via print head, to leave cartridge internally clean + ready to fill
    Filling process - only the best German ink (OCP) is used. It is filled through the print head, via a vacuum application to a weighed quantity.
    3 millilitres of ink, is now drawn out of the cartridge to prime it ready for printing.
    Print test - each cartridge is tested to ensure quality.
    Cartridge clean - cartridge is cleaners externally & labelled
    Cartridge seal - finally cartridges are taped or clipped to prevent leakage and put into a sealed bag.

Please note :

It is not possible to reset the ink status monitor on remanufactured cartridges.

When the cartridges are installed they will register as low or empty.

When prompted please press and hold the resume button for at least 5 seconds to enable you to use the full contents.

For The Following Printers:

Pixma iP2700, Pixma iP2702, Pixma MP230, Pixma MP235, Pixma MP240, Pixma MP250, Pixma MP252, Pixma MP260, Pixma MP270, Pixma MP272, Pixma MP280, Pixma MP282, Pixma MP330, Pixma MP480, Pixma MP490, Pixma MP492, Pixma MP495, Pixma MP499, Pixma MX320, Pixma MX330, Pixma MX340, Pixma MX350, Pixma MX360, Pixma MX410, Pixma MX420